Skip to content

NitroTek

F-35 LIGHTNING 64MM GREY RC EDF JET PNP VERSION

  • Wing span
    		• 608mm 
  • Length
    		• 840mm 
  • Flying Weight
    		• 600g 
  • Wing Load
    		• 57g/dm2 
  • Wing area
    		• 8.7dm2 
  • Range
    		• 1000m

      ,
    • 9 gram servos 
      • ,
    • Brushless motor and 25A ESC 
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Stunning paintwork
      • ,
    • 64mm electric ducted fan
      • ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    • Is capable of the 'Cobra Manoeuvre'
      • ,
    ,

    The F-35 Lightning II is a, single-seat, single-engine, stealth multirole ...

    Read more

    NitroTek

    F14 TWIN 70MM JOLLY ROGER TOP GUN EDF RC JET PNP VERSION

  • Wingspan
    		• 1100mm
  • Length
    		• 1086mm
  • Flying Weight
    		• 1100-1300g
  • Twin motor
    		• Powerful 2430 outer runner brushless motor
  • Twin ESC
    		• 45A ESC 5A UBEC

      ,
    • Twin 70mm ducted fan
      • ,
    • With variable sweep wing, retract system
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • 90% assembled
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Working swing wings
      • ,
    • Retractable landing gear
      • ,
    • Stunning paintwork
      • ,
    • Twin 70mm electric ducted fans
      • ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    ,

    The F-14 Tomcat is a supersonic, twin-engine, two-seat, variable-sweep winged ...

    Read more

    NitroTek

    F-117 BLACKNIGHT STEALTH 70MM EDF RC JET PNP VERSION

  • Wingspan
    		• 734mm
  • Length
    		• 1100mm
  • Flying Weight
    		• 980g
  • Motor
    		• 2836 outer runner brushless motor 
  • ESC
    		• 45A ESC 5A UBEC

      ,
    • 70mm Ducted fan
      • ,
    • Seven 9g servos, one 17g servo
      • ,
    • Automatic landing gear system
      • ,
    • Steering front landing gear
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • 90% assembled
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Automatic landing gear
      • ,
    • Stunning paintwork
      • ,
    • 70mm electric ducted fan
      • ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    ,

    The Lockheed F-117 Nighthawk is a U.S. Airforce stealth ground ...

    Read more

    NitroTek

    F-5 64MM TIGER EDF RC JET PNP VERSION

  • Wingspan
    		• 532mm
  • Length
    		• 939mm
  • Flying Weight
    		• 500g
  • Wing area
    		• 7dm2 
  • Wing Load
    		• 70g/dm2
  • Servos
    		• 5 x 9g servos
  • Fan
    		• 64MM Ducted
  • Motor
    		• Powerful 14L in-runner brushless
  • ESC
    		• 25A ESC

      ,
    , ,
      ,
    • 64 mm EDF
      • ,
    • Full aerobatic characteristics
      • ,
    • Brushless setup
      • ,
    • Ready to fly in just minutes
      • ,
    • Super tough, lightweight airframe
      • ,
    • Perfect appearance and emulation
      • ,
    • Take off from ground or hand launched
      • ,
    • Excellent flight performance
      • ,
    • Stable inverted flight
      • ,
    • Made by Starmax - industry leaders in quality
      • ,
    • Slow speed flying capable
      • ,
    ,

    The F-5E aircraft was designed for use by allies primarily ...

    Read more

    NitroTek

    F16 64MM RC JET VECTORED PNP VERSION IN BLACK AND GREY

  • Wingspan
    		• 800mm
  • Length
    		• 1020mm
  • Wing Load
    		• 35 g/dm²
  • Fly Weight
    		• 1100g

      ,
    • 7 pcs 9g servos
      • ,
    • Brushless motor 2632 out runner KV4100
      • ,
    • 45A ESC 5A UBEC
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • Thrust vectoring
      • ,
    • 90% assembled
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Stunning paintwork
      • ,
    • 64 mm electric ducted fan
      • ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    ,

    This fighter is one of the classics, the F-16 is ...

    Read more

    NitroTek

    CESSNA 182 RED RC PLANE PNP VERSION

  • Length
    		• 1030mm
  • Flight weight
    		• 930g
  • Wingspan
    		• 1410mm
  • Wing load
    		• 34g/dm2

      ,
    • 4pcs 9G servos
      • ,
    • Out-runner Brushless motor, KV900
      • ,
    • 30A ESC
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • 90% assembled
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Stunning paintwork
      • , ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    ,

    This is a large scale model of the Cessna 182 ...

    Read more

    NitroTek

    TAIGEN ADVANCED METAL RC TANK - TIGER CAMO

    		0px; padding
  		• 0px; padding
  		• 0px; padding
  		• 0px; padding
  		• 0px; padding

    ,

    , ,
      ,
    • Special paint job
      • ,
    • Metal caterpillars
      • ,
    • Metal drive wheel and idle wheel
      • ,
    • Metal gearbox
      • ,
    • Shock absorbers
      • ,
    • Metal network
      • ,
    • Painted commander
      • ,
    • Strengthened metal chassis
      • ,
    • Metal view hole
      • ,
    • Metal armour
      • ,
    • Metal turret cover
      • ,
    • Metal shoulder wheel
      • ,
    • Metal front and rear hook
      • ,
    • Metal machine gun light
      • ,
    • Metal front forward light
      • ,
    • Upgraded Ni-MH 2000Mah battery
      • ,
    • Smoke effects simulator
      • ,
    • Sound effects simulator
      • ,
    ,

    The Taigen BB tanks are of the highest quality and ...

    Read more

    NitroTek

    TAIGEN ADVANCED RC TANKS- PANZER IV

    		0px; padding
  		• 0px; padding
  		• 0px; padding
  		• 0px; padding
  		• 0px; padding
  • Recoil action when Rc Tanks fires a bb

    • ,

     

    , ,

    Rc Tanks Features and upgrades include:

    ,
      ,
    • Special paint job
      • ,
    • Metal caterpillars
      • ,
    • Metal gearbox
      • ,
    • Metal shock absorbers
      • ,
    • Painted commander
      • ,
    • Metal machine gun light
      • ,
    • Upgraded Ni-MH 2000Mah battery
      • ,
    • Smoke effects simulator
      • ,
    • Sound effects simulator
      • ,
    ,

    The Taigen BB tanks are of the highest quality and ...

    Read more

    NitroTek

    BARBARIAN EXL 1/8 SCALE BRUSHLESS RC MONSTER TRUCK 2.4G

  • Height
    		• 230mm
  • Length
    		• 570mm
  • Width
    		• 450mm
  • Wheel base
    		• 370mm
  • Track F/R
    		• 355mm
  • Ground clearance
    		• 50mm
  • Weight
    		• 4600g

      ,
    , ,
      ,
    • 4WD, Brushless Power System;
      • ,
    • Newly designed C-hub steering system. King pin axis extends to the wheel centre, improving steering performance;
      • ,
    • Newly developed suspension system, twin adjustable rear suspension modes for flexible driving;
      • ,
    • Solid aluminum chassis, centralised chassis design to get quicker steering and fast response;
      • ,
    • Motor mount, not only keeps the motor cool, but also protects the motor when jumping and bashing
      • ,
    • Adjustable battery holder mounts, can fit almost all stick Li-Pos available in the market;
      • ,
    • Optional mechanical braking system, provides accurate deceleration and jumping control;
      • ,
    • 16mm super big bore oil aluminum shocks;
      • ,
    • All steel gear, machined motor gear, machined diff. gear;
      • ,
    • 17mm hex alum. wheel hub;
      • ,
    • Realistic All-terrain tyres with foam inserts;
      • ,
    • Ultra-strong front and rear bumpers;
      • ,
    • Performance-designed chrome wheel.
      • ,
    • Front CVD, has all ball bearing construction
      • ,
    ,

    The Barbarian EXL is a fully built, top of the ...

    Read more

    NitroTek

    SELF BUILD RAPTOR RC TRUGGY - BRUSHLESS VERSION

  • Width
    		• 330MM
  • Height
    		• 140MM
  • Length
    		• 410MM
  • Wheelbase
    		• 270MM
  • Gear ratio
    		• 8.95
  • Wheel dia.
    		• 110*55MM
  • Ground clearance
    		• 36MM
  • Radio
    		• FM 27mhz Pistol Type
  • Battery
    		• 11.1V 1800mah Li-Polymer
  • Motor
    		• Brushless 2399kv
  • ESC
    		• 25A Brushless

      ,
    • Scale: 1:10
      • ,
    , ,
      ,
    • 1/10 Scale brushless powered build it yourself car
      • ,
    • Everything needed to build included, even the tools
      • ,
    • 4WD Shaft drive system
      • ,
    • Extreme power brushless motor
      • ,
    • Oil-filled shocks
      • ,
    • Powerful Li-Polymer battery with balanced charger
      • ,
    • Front and rear bevel differentials
      • ,
    • Brushless ESC
      • ,
    • Pre-painted exclusive body shell
      • ,
    • High quality FM 27MHZ CE approved Radio system with changeable crystals
      • ,
    ,

    Our new full 1:10 scale Raptor brushless rc truggy self ...

    Read more

    NitroTek

    GS RACING CL-1 1/8TH NITRO RC RALLYCROSS BUGGY

  • Length
    		• 520mm
  • Width
    		• 310mm
  • Height
    		• 220mm
  • Ground clearance
    		• 75mm
  • Wheelbase
    		• 325-330mm
  • Weight
    		• 3450g

      ,
    • Track: F:306mm, R:306mm
      • ,
    • Gear ratio: C:44/13T, F/R 38/11T
      • ,
    • 2.4G radio gear
      • ,
    , ,
      ,
    • 100% factory assembled 1/8th scale race buggy
      • ,
    • Full range of options/upgrades available
      • ,
    • Fully fitted with precision ball bearings
      • ,
    • Tuned exhaust system
      • ,
    • Powerful Team Infinity .25 Engine
      • ,
    • Pre-glued GS Road Spider tyres on GS dish wheels
      • ,
    • Front universal drive shafts
      • ,
    • Pre-painted and trimmed Kom Designs body with decals
      • ,
    ,

    The CL-1 is designed for those wanting ultimate performance with ...

    Read more

    NitroTek

    GS RACING XUT RTR 1/8TH SCALE NITRO RC TRUGGY 2.4G

  • Length
    		• 530mm
  • Width
    		• 420mm
  • Height
    		• 215mm
  • Ground Clearance
    		• 75mm
  • Wheelbase
    		• 370-375mm
  • Track
    		• F/R 330-360mm
  • Gear Ratio
    		• C 58/13T, F/R 38/11T
  • Weight
    		• 4100g

      ,
    , ,
      ,
    • 100% Factory Assembled 1/8th Scale Race Truggy
      • ,
    • Over 50% Compatible with Storm CL-1 Series Buggies
      • ,
    • Full Line of Options and Upgrade Parts Available
      • ,
    • Full Precision Engineered Ball Bearings
      • ,
    • Tuned .25 Exhaust System
      • ,
    • Powerful Infinity Big Block .25 Rear Exhaust Engine with Pull Start
      • ,
    • GS Dish Truggy Wheels with Pre-glued GS Cubic Truggy Tires
      • ,
    • Front Universal Driveshafts
      • ,
    • Aluminum 13mm Big Bore Oil-Filled Shocks
      • ,
    • Pre-Painted and Trimmed Korn Designs Body with Decals
      • ,
    • Professional 3mm Aluminum Hard-Coated Chassis
      • ,
    • Adjustable 3mm Aluminum Steering Plate
      • ,
    • Adjustable Servo Saver Pipe Set
      • ,
    • 145cc Big Fuel Tank
      • ,
    • Oversized Bearings in Front and Rear Hub System
      • ,
    ,

    The international race winning GS Racing is back in the ...

    Read more

    NitroTek

    GS RACING VISION PRO RTR NITRO RC CAR 2.4G

  • Length
    		• 380mm
  • Width
    		• 198mm
  • Height
    		• 104mm
  • Ground clearance
    		• F/R
  • Wheelbase
    		• 260mm
  • Track
    		• 172mm
  • Gear ratio
    		• 11.69
  • Weight
    		• 1700g
  • Tank
    		• 75cc
  • Radio equipment
    		• 2.4GHz with LCD display
  • Engine
    		• Team Infinity .18 Nitro

      ,
    ,
      ,
    , ,
      ,
    • Fully adjustable pivot ball suspension
      • ,
    • Finished pre-mounted body
      • ,
    • GS Racing camber clip system
      • ,
    • 75cc fuel tank with splash guard
      • ,
    • 2.4G Radio system included
      • ,
    • Sealed radio box with transponder mount
      • ,
    • GS fuel bottle and glowstarter included
      • ,
    • Powerful nitro engine
      • ,
    • 7075 aluminium alloy chassis – for lightness and strength
      • ,
    • Aluminium shock bodies with adjustable dampening system
      • ,
    • Front and rear sway bar system
      • ,
    • Lightened aluminium wheel hubs
      • ,
    • Aluminium 2 speed gear box system
      • ,
    • GS Racing camber clip system
      • ,
    ,
      ,
    ,

    The Vision Pro is GS Racing's top of the range ...

    Read more

    NitroTek

    GS RACING VISION EVOE RTR BRUSHLESS RC CAR

  • Scale
    		• 1/10th
  • Length
    		• 380mm
  • Height
    		• 104mm
  • Ground clearance
    		• 5.5mm
  • Axle base
    		• 260mm
  • Gear ratio
    		• 5.82
  • Race Weight
    		• 3300g
  • Radio equipment
    		• 2.4GHz with LCD display
  • F. Wheelbase
    		• 198mm
  • R. Wheelbase
    		• 198mm

    		0px; padding
  		• 0px; padding
  		• 0px; padding
  		• 0px; padding
  		• 0px; padding
  		• 0px; padding
    • ,
    , ,

    The EvoE is GS Racing's top of the range 1/10th ...

    Read more

    NitroTek

    GS RACING STORM EVO 25 1/8TH RC NITRO BUGGY

  • Length
    		• 490mm
  • Height
    		• 182mm
  • Ground clearance
    		• 22mm
  • Wheelbase
    		• 320-325mm
  • Tyres
    		• 116mm x 42mm
  • Weight
    		• 3350g
  • Radio
    		• 2.4G
  • Fuel tank
    		• 125cc

      ,
    • Track: F:256mm (adjustable), R:251mm
      • ,
    , ,
      ,
    • 100% factory assembled 1/8th scale race buggy
      • ,
    • Over 75% compatible with Storm series buggies
      • ,
    • Full range of options/upgrades available
      • ,
    • Fully fitted with precision ball bearings
      • ,
    • Tuned .25 exhaust system
      • ,
    • Powerful Team Infinity .25 Engine
      • ,
    • Pre-glued GS Road Spider tyres on GS dish wheels
      • ,
    • Front universal drive shafts
      • ,
    • Pre-painted and trimmed Kom Designs body with decals
      • ,
    • Low centre of gravity
      • ,
    • Dust guard front C-hub
      • ,
    • 125cc fuel tank with filter and adjustable pressure fitting
      • ,
    • Adjustable front/rear toe in and camber
      • ,
    • Front, centre and rear differentials
      • ,
    • 3 shoe clutch system
      • ,
    • Adjustable wheelbase
      • ,
    • Heavy duty suspension arms
      • ,
    • 4WD shaft driven transmission
      • ,
    • 46 tooth spur gear
      • ,
    ,

    The international race winning GS Racing is back in the ...

    Read more

    Follow us on

    Twitter Facebook f Linkedin in Google plus g
    BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby